M
0
Advanced Tesla diagnostic education course
Published 10/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 14 lectures (1h 36m) | Size: 1.1 GB
for enthusiasts of tesla cars
What you'll learn
knowledge about changing secured configuration of tesla
root access to file of tesla system
Keys. How to add, how to read, how to write new. Several methods
Airbags crash reset. How to read and reset by software and hardware
Requirements
recommendation to go through basic course
Description
General. MCU. Warning lights. Driving status. How to connect to vechicle ports.
MCU is Tesla's Media Control Unit hardware. MCU 1 was used in Model S and Model X cars after March 2018. The Model 3 and Model Y started with MCU2 and later transitioned to MCU3 in late 2021. Vehicles with MCU1 can be upgraded to MCU2. MCU2 has the Intel Atom processor.
Driving status
1.The power meter displays real-time power usage. During acceleration, the bar fills to the right with a gray color (or white if the display is dark) to represent power being used. During deceleration (when Model Y is moving and you release your foot from the accelerator pedal), the bar fills to the left with a green color to represent power being fed back to the Battery by regenerative braking. 2.When Autosteer is available but you haven't activated it, the icon is gray. When it is active - the icon is blue 3.Currently selected drive mode: Park, Reverse, Neutral, or Drive. 4.Driving speed. 5.Other cars detected on the road (as applicable) and etc.
Connection to the LAN ports
Another new port will be open after entering into Factory / Developer mode in Tegra CPU
Diagnostic modes. Activation of modes.
On new firmware, the entrance to the Factory occurs through reset all data. The main difference between modes
• Factory mode remains after MCU reboot (Media control unit)
•Developer mode after reboot MCU crashes
•After enabling these modes, you can read Alerts (errors) in the block
Loki diagnostic hardware. Installing firmware, changing configuration and maps.
•You also can do the following work
•Reset valet
Reset pin to drive
Reset pin speed limit
•Rail on
Read / Write Tesla car Config
Install Firmware
Install Maps, change map region
Redeploy devices and car parts
Installing navigation maps
•WARNING! Before installing maps, make sure that the vehicle is not downloading / installing the firmware and whether the alarm clock is off.
•To install car maps, you need to connect to WiFi, and wait about 10 minutes to make sure that the car does not suddenly download the firmware at the moment of maps installation.
•If something is installing than you need to wait until the firmware will be fully installed.
Toolbox 2.1 offline & 3.0 online - diagnostic software.
•Toolbox 2.1 must be in Factory Mode to work. For cars with a date of manufacture from 2012 to February 2018.
•Press the brake pedal to turn on the rail mode ("car ignition") if there are no keys. Press the diagnostics button, Alerts DTCs. After that, in the Panel menu, we can view all Errors.
•Then go through the menu items, such as Battery, Brakes, Body Controls, Thermal ( for example, we can see what is happening with pumping coolant, de-airing the cooling system), Restraint System (For example, resetting airbag errors and air suspension errors.)
Abbreviations. Rear and Front lights .
About Autopilot.
Secure configuration.
I am root.
Keys. How to add, how to read, how to write new. Several methods.
Airbags crash reset. How to read and reset by software and hardware
•Some materials will be repeated from basic course..
Who this course is for
tesla car owners, self-studing amateur, enthusiasts of tesla cars
Download link
rapidgator.net:
You must reply in thread to view hidden text.
uploadgig.com:
You must reply in thread to view hidden text.
nitroflare.com:
You must reply in thread to view hidden text.
1dl.net:
You must reply in thread to view hidden text.
