OP
200
- Thread Starter
- #1
Siemens Syncrofit 16.4.3 for NX 12 - 2212 Series (x64)
Syncrofit is an environment for automating the placement and selection of fasteners at the stages of design and technological preparation, performing design checks, describing the assembly process, as well as preparing data for equipment. Syncrofit can run NX CAD systems and CATIA V5.
Functionality
Syncrofit allows you to set a parametric description of fasteners and fastener sets, select fasteners according to specified rules, check the compliance of spaced fasteners with fastener placement rules, describe the assembly process sequence, including technological operations, temporary fasteners and temporary holes. Syncrofit also allows you to prepare data for projectors and drilling machines and other equipment.
Features Syncrofit
Design preparation Parametric description of fasteners
Determination of package thickness for each fastener position
Selection of different types of fasteners according to different rules in accordance with the calculated package thickness
Description and creation of holes
Loading and positioning of solid fasteners Creation of
simplified fasteners edges of parts, step between fastening points and fastening seams, plunge into radii, etc.) Description of welded joints Modeling of tools Description of surface treatment Formation of the design specification of fasteners
Preparation of data for projectors, drilling machines and automated riveting systems
Technological preparation Description of the assembly sequence
Creation of individual operations and states
Creation of temporary fasteners
Creation of temporary holes
Formation of the production specification taking into account temporary fasteners
Benefits that Syncrofit provides
Significant reduction in time spent on fastener placement and selection
Reduced errors in fastener placement, modification, data preparation for production
Increased speed of changes
Reduced time required to verify the correct placement of fasteners
Full and accurate description of fasteners in the early stages of design
High level of specification of requirements to suppliers
Rapid preparation of data for various equipment
System requirements
Pre-installed Siemens NX 12-2212 Series with crowbar from SSQ
What's New
official site does not provide any info about changes in this version.
Siemens Syncrofit 16.4.3 for NX 12 - 2212 Series (x64) (830.75 MB)
Turbobit Link(s)
NitroFlare Link(s)
RapidGator Link(s)
Syncrofit is an environment for automating the placement and selection of fasteners at the stages of design and technological preparation, performing design checks, describing the assembly process, as well as preparing data for equipment. Syncrofit can run NX CAD systems and CATIA V5.
Functionality
Syncrofit allows you to set a parametric description of fasteners and fastener sets, select fasteners according to specified rules, check the compliance of spaced fasteners with fastener placement rules, describe the assembly process sequence, including technological operations, temporary fasteners and temporary holes. Syncrofit also allows you to prepare data for projectors and drilling machines and other equipment.
Features Syncrofit
Design preparation Parametric description of fasteners
Determination of package thickness for each fastener position
Selection of different types of fasteners according to different rules in accordance with the calculated package thickness
Description and creation of holes
Loading and positioning of solid fasteners Creation of
simplified fasteners edges of parts, step between fastening points and fastening seams, plunge into radii, etc.) Description of welded joints Modeling of tools Description of surface treatment Formation of the design specification of fasteners
Preparation of data for projectors, drilling machines and automated riveting systems
Technological preparation Description of the assembly sequence
Creation of individual operations and states
Creation of temporary fasteners
Creation of temporary holes
Formation of the production specification taking into account temporary fasteners
Benefits that Syncrofit provides
Significant reduction in time spent on fastener placement and selection
Reduced errors in fastener placement, modification, data preparation for production
Increased speed of changes
Reduced time required to verify the correct placement of fasteners
Full and accurate description of fasteners in the early stages of design
High level of specification of requirements to suppliers
Rapid preparation of data for various equipment
System requirements
Pre-installed Siemens NX 12-2212 Series with crowbar from SSQ
What's New
official site does not provide any info about changes in this version.
Siemens Syncrofit 16.4.3 for NX 12 - 2212 Series (x64) (830.75 MB)
Turbobit Link(s)
NitroFlare Link(s)
RapidGator Link(s)
